NZ Technologies Inc. Information

NZ Technologies Inc. (NZTech) designs and manufactures AI powered touch and in-air gesture sensing systems in Vancouver, Canada. At the core is HoverCore™, the company's proprietary AI powered electric field sensing platform: sensor hardware, embedded firmware and machine learning models that track a fingertip in three dimensions, above and through a cover surface, and adapt in real time to gloves, liquids, cover thickness and electrical noise. Protected by more than 45 patents and delivered as a complete hardware and software platform, with USB HID output, APIs and an SDK, HoverCore gives integrators touch, hover and gesture from a single sensor. HoverTap™ is the board level touch and in-air gesture module built on HoverCore, for OEMs and system integrators. Display, kiosk, ATM, vending, industrial HMI and equipment manufacturers build it into their own products as a drop in replacement for a conventional touchscreen: HDMI in, USB HID out, no driver required. HoverTap reads a fingertip through up to 20 mm of cover material and air gap combined, with heavy tactical, work and surgical gloves, in rain and under sterile drapes. That lets integrators put a sacrificial vandal proof cover in front of the display and reach IK10 and IP65 on the finished product. Modules run from 7 to 43 inches and carry UL 62368-1 component level certification. TIPSO™ AirPad is an FDA cleared, IEC 60601 certified wireless controller that lets surgeons and interventional radiologists navigate medical images from the sterile field, without leaving the table or relaying instructions to a technologist. Battery powered and drape compatible, it sits at the bedside and drives the imaging display directly: scroll, zoom, pan and window from the operator's own hand. Hospitals use it to shorten procedures, reduce staff in the room and keep the clinician's attention on the patient. It is in clinical use across interventional radiology, vascular, neuro, orthopaedic and hepatobiliary procedures, and in