Liquid Visionz Information

Liquid Visionz specializes in Hydrographics also known as water transfer printing, immersion printing, camo printing or hydro dipping. This process is used to apply a polyvinyl film with a graphic image using a vat of water. Hydrographics is used to put a custom design on 3 dimensional items that range from guns, bows, automotive trim and wheels, bicycle and motorcycle frames and parts, marine trim, snow mobiles, etc. You can also use decals to personalize dipped items such as insulated mugs, coolers, or a set of corn hole boards for your next tailgate. The list goes on and on. The film can be applied to many types of surfaces including plastics, fiberglass, wood, ceramic and metal. If the item can be dipped in water, it can be water transfer printed. There are hundreds of different prints and you can alter any print by using a different color base coat. After the base-coat, the item is ready to be dipped. There are a number of steps your item goes through to be sure it is of the highest quality finish. First it is sanded down to remove minor blemishes and to ensure a good bond with the primer. We are usually able to remove a minor blemish; deeper scratches may not be able to be fixed but usually cover well when pattern is applied. After primer your base coat of automotive quality paint is applied in your choice of color. This color will show through the design you have chosen. It is then ready for the design to be applied in our state of the art dipping tank. After it has dried it is finally ready for the clear coat finish. The clear coat range from a matte to high gloss. When this step is complete the finish is of the same quality as an automobile. Your item will have a limited lifetime warranty against our workmanship. Call us today for a FREE quote!